13.3 inspection

Post-Ride Routine

1. **Glance at the chain** — re-lube if it ran in wet conditions. 2. **Check tires for cuts or embedded debris** — pull anything visible out before it...

Difficulty ★★☆ moderate
Time 15 min
Applies to All bikes

Tools

  • Standard workshop tools

Procedure

  1. Glance at the chain

    — re-lube if it ran in wet conditions.

  2. Check tires for cuts or embedded debris

    — pull anything visible out before it works through.

  3. Wipe the frame down

    if muddy.

  4. Look at the brake pads

    — any unusual wear?

  5. Listen for any new noises

    as you push the bike — squeaks, clicks, creaks. Address before the next ride if anything new. ---
  1. Glance at the chain — re-lube if it ran in wet conditions.
  2. Check tires for cuts or embedded debris — pull anything visible out before it works through.
  3. Wipe the frame down if muddy.
  4. Look at the brake pads — any unusual wear?
  5. Listen for any new noises as you push the bike — squeaks, clicks, creaks. Address before the next ride if anything new.