Free cycling tool · no account needed
How much tubeless sealant do you need?
Enter your wheel and tire size for an initial fill, a top-up amount, what to carry and what to buy — shown next to what the manufacturers publish.
Quick answer: Start with about 50 ml per tire for 28 mm road tubeless, 75 ml for 40 mm gravel and 115 ml for a 29 × 2.4" MTB tire. Top up with about half that when the level drops.
Check the highlighted fields to see your amounts.
Drais estimate
Your sealant amounts
- Initial fill (per tire)
- Fill each tire with 75 ml (2.5 fl oz).
- Top-up (per tire)
- Top up with 35 ml (1.2 fl oz) when the level drops.
- Carry on big rides
- Carry 80 ml (2.7 fl oz) — one full refill after a burp or large hole.
- Buy
- Buy at least 250 ml (8.5 fl oz) for 2 wheels plus spares.
What the manufacturers publish
| Brand | Product | Chart row | Per tire | Refresh guidance (quoted) | Source | Checked |
|---|---|---|---|---|---|---|
| Stan's NoTubes | Original & Race Day | 700×40 | 60 ml | check/refresh your sealant quarterly | stans.com (how-much-sealant), stans.com (sealant-support) | September 18, 2026 |
| Orange Seal | Regular / Endurance / Subzero | Not specified | Not specified | Average life (days): Regular 30–45, Endurance 60–120, Subzero 60–180 | Orange Seal (PDF) | September 18, 2026 |
| Silca | Ultimate Tubeless Sealant | 700×40 | 80 ml | re-installed every 6 months; new tire: "adding an extra ounce" | silca.cc | September 18, 2026 |
| Muc-Off | No Puncture Hassle Road & Gravel (≤ 47 mm) / MTB (≥ 48 mm) | Gravel 30–45c | 70–80 ml | Road & Gravel: "Lasts 3-6 months… or every 750 miles"; up to 20 ml extra (Road & Gravel) / up to 30 ml extra (MTB); "Minimum amount per tyre" | muc-off.com (road-gravel-tubeless-sealant), muc-off.com (mtb-tubeless-sealant) | September 18, 2026 |
| Peaty's | Holeshot Biofibre | Cyclocross | 60–75 ml | checking your sealant every three months… hotter climates… every month; up to 30 ml extra for wider rims/extra protection | peatys.com | September 18, 2026 |
How the Drais estimate works
- Inner surface
- The tire is modeled as a torus: the inner surface grows with both the wheel’s bead-seat diameter and the tire width. Wider tires need more sealant to coat the casing and still leave liquid for punctures.
- Base fill and rounding
- A fixed base fill per square decimeter of inner surface, calibrated to land mid-chart of the published brand figures. Amounts are rounded to practical pours, with a sensible minimum.
- Adjustments
- Supple casings +10% (extra-light casings absorb more, as Silca notes), reinforced casings −5%, hot & dry climates +15% (Silca suggests starting with more), thorn country +25% (matching the brands’ published “add extra for increased protection” guidance).
- Tire inserts
- +10% with an insert. This one is a Drais heuristic: no manufacturer publishes insert guidance.
- The four amounts
- Initial fill coats a fresh setup. Top-up is half a fill, for routine maintenance. Carry is one full refill for the trail. Buy multiplies the fill by your wheels and adds spare refills.
- Estimate vs brand figures
- The Drais estimate is volume-based math and is labeled as such. The brand figures in the table above are the manufacturers’ own published charts, shown for comparison — they never change the estimate.
Tubeless sealant questions
How much sealant for road tubeless tires?
About 50 ml per 28 mm tire and 60 ml per 32 mm tire for a first fill (Drais estimate, normal conditions). Compare with your brand’s own figure in the brand table on this page.
How much sealant for 40 mm gravel tires?
About 75 ml per 40 mm tire and 85 ml per 45 mm tire for a first fill (Drais estimate, normal conditions). Thorny terrain calls for more — select it in the calculator.
How much sealant for a 29er MTB tire?
About 115 ml per 29 × 2.4" tire and 110 ml per 27.5 × 2.4" tire for a first fill (Drais estimate, normal conditions).
How often do I need to top up my sealant?
Typically every 2–6 months, depending on the brand and your climate. Stan’s and Peaty’s say to check it every 3 months, Muc-Off says its road and gravel sealant lasts 3–6 months and Silca says to replace it every 6 months. Hot, dry climates dry sealant out faster: Peaty’s advises checking monthly there. Each brand’s own refresh guidance is quoted in the brand table on this page.
Can I mix different brands of sealant?
Not recommended. Different sealants use different chemical bases (latex vs non-latex), and most brands advise against mixing because the formulas can react and clump. Remove the old sealant before switching brands.
Is the Drais estimate what the brands recommend?
Not exactly. The Drais estimate is calculated from your tire’s inner surface and your riding conditions. The brand figures are the manufacturers’ own published amounts for your tire size, shown beside it so you can compare.
Know when your sealant went in.
Drais stores the sealant date on each tire profile, so you always know when every tire was last refreshed.